Book A Course

KNX is Worldwide STANDARD for Home and Building Control

Five day KNX Basic Course takes place at Home of Technologies Training Room.

What is included in the course?

- Why KNX?
- KNX basics
- KNX functions like dimming, shutter & blinds, room temperature control
- How to set up KNX functions with ETS5
- ETS Diagnostics

Do not hesitate to use this unique opportunity to learn more about KNX in general and ETS in particular.

KNX Certification Course allows delegates to effectively deliver benefits of the KNX/EIB building controls, and provide value-added system design and installation service for their clients, after the KNX theory and practical training in ETS (the manufacturer independent programming tool). KNX Certification Course ends with required exam to become a KNX Partner including presentation on the KNX.org

Price: £600 + VAT

KNX is Worldwide STANDARD for Home and Building Control

Five day KNX Basic Course takes place at Home of Technologies Training Room.

What is included in the course?

- Why KNX?
- KNX basics
- KNX functions like dimming, shutter & blinds, room temperature control
- How to set up KNX functions with ETS5
- ETS Diagnostics

FREE ETS5 Lite USB Dongle (Worth £160 / €200)

We know that most of you will need it to get your hands dirty with KNX, so we have created this offer to make it easier for you to get started.

Do not hesitate to use this unique opportunity to learn more about KNX in general and ETS in particular.

KNX Certification Course allows delegates to effectively deliver benefits of the KNX/EIB building controls, and provide value-added system design and installation service for their clients, after the KNX theory and practical training in ETS (the manufacturer independent programming tool). KNX Certification Course ends with required exam to become a KNX Partner including presentation on the KNX.org

Price: £660 + VAT

KNX is Worldwide STANDARD for Home and Building Control

Five day KNX Basic Course takes place at Home of Technologies Training Room.

What is included in the course?

- Why KNX?
- KNX basics
- KNX functions like dimming, shutter & blinds, room temperature control
- How to set up KNX functions with ETS5
- ETS Diagnostics

Includes additional training on heating & visualisation.

We know that most of you will need it to get your hands dirty with KNX, so we have created this offer to make it easier for you to get started.

Do not hesitate to use this unique opportunity to learn more about KNX in general and ETS in particular.

KNX Certification Course allows delegates to effectively deliver benefits of the KNX/EIB building controls, and provide value-added system design and installation service for their clients, after the KNX theory and practical training in ETS (the manufacturer independent programming tool). KNX Certification Course ends with required exam to become a KNX Partner including presentation on the KNX.org

Price: £650 + VAT

Don't have time to attend the full 5-day KNX Basic Certification Course? Then 16hrs KNX Partner Course held at Home of Technologies Training room is the solution for you to get fully trained on KNX and get certified at the end you read theory at home.

What is included in the course?

Introduction

Our tutor will introduce the theory. If trainees have any questions after completing e-Campus or reading the theory, then the questions will be answered here and we will make sure everyone is at a level to move to the practical training.

12 Hours Practical Training

This is the core of KNX Partner Course. In our training room, full with various KNX devices from 20+ manufacturers, you will be trained on how to program:

• Lights & Dimming
• Shutter & Blinds
• Lines (Telegrams)
• HVAC

Visualisation

When programming is completed, our tutor will introduce you to KNX visualisation and servers. This as an additional knowledge that no other KNX Basic course offers and will benefit you greatly in the future if you will have a requirement to do a KNX visualisation for touch panels.

Pre-requisites:

To take advantage of this course and be able to take the KNX Basic Certification at the end of training you must fulfil one of the following requirements:

- 30+ score on e-Campus;

or

- Read and memorise the KNX Basic manual which will be sent you upon booking the course (about 16 hours of suggested reading required).

Price: £300 + VAT

Don't have time to attend the full 5-day KNX Basic Certification Course? Then 16hrs KNX Partner Course held at Home of Technologies Training room is the solution for you to get fully trained on KNX and get certified at the end you read theory at home.

What is included in the course?

Introduction

Our tutor will introduce the theory. If trainees have any questions after completing e-Campus or reading the theory, then the questions will be answered here and we will make sure everyone is at a level to move to the practical training.

12 Hours Practical Training

This is the core of KNX Partner Course. In our training room, full with various KNX devices from 20+ manufacturers, you will be trained on how to program:

• Lights & Dimming
• Shutter & Blinds
• Lines (Telegrams)
• HVAC

Visualisation

When programming is completed, our tutor will introduce you to KNX visualisation and servers. This as an additional knowledge that no other KNX Basic course offers and will benefit you greatly in the future if you will have a requirement to do a KNX visualisation for touch panels.

FREE ETS5 Lite USB Dongle (Worth £160 / €200)

We know that most of you will need it to get your hands dirty with KNX, so we have created this offer to make it easier for you to get started.

Pre-requisites:

To take advantage of this course and be able to take the KNX Basic Certification at the end of training you must fulfil one of the following requirements:

- 30+ score on e-Campus;

or

- Read and memorise the KNX Basic manual which will be sent you upon booking the course (about 16 hours of suggested reading required).

Price: £360 + VAT

KNX is Worldwide STANDARD for Home and Building Control

Five day KNX Basic Course takes place at Home of Technologies Training Room.

What is included in the course?

- Why KNX?
- KNX basics
- KNX functions like dimming, shutter & blinds, room temperature control
- How to set up KNX functions with ETS5
- ETS Diagnostics

Includes a starter kit that allows you to control lights, heating and blinds:
USB, KNX PSU, I/O, ENCLOSURE, Thermostat, Probe, 4 Push Button, KNX 2 fold sensor.

We know that most of you will need it to get your hands dirty with KNX, so we have created this offer to make it easier for you to get started.

Do not hesitate to use this unique opportunity to learn more about KNX in general and ETS in particular.

KNX Certification Course allows delegates to effectively deliver benefits of the KNX/EIB building controls, and provide value-added system design and installation service for their clients, after the KNX theory and practical training in ETS (the manufacturer independent programming tool). KNX Certification Course ends with required exam to become a KNX Partner including presentation on the KNX.org

Price: £1200 + VAT

KNX is Worldwide STANDARD for Home and Building Control

Five day KNX Basic Course takes place at Home of Technologies Training Room.

What is included in the course?

- Why KNX?
- KNX basics
- KNX functions like dimming, shutter & blinds, room temperature control
- How to set up KNX functions with ETS5
- ETS Diagnostics

Includes 750-889 KNX IP Controller-51220618 and ETS5 Lite license.

We know that most of you will need it to get your hands dirty with KNX, so we have created this offer to make it easier for you to get started.

Do not hesitate to use this unique opportunity to learn more about KNX in general and ETS in particular.

KNX Certification Course allows delegates to effectively deliver benefits of the KNX/EIB building controls, and provide value-added system design and installation service for their clients, after the KNX theory and practical training in ETS (the manufacturer independent programming tool). KNX Certification Course ends with required exam to become a KNX Partner including presentation on the KNX.org

Price: £1250 + VAT

KNX is Worldwide STANDARD for Home and Building Control

One day technical refresher at Home of Technologies Training Room.

What is included in the course?

- Technical refresher
- Visualisation servers
- Visualisation with Alexa integration

We know that some of you might have got a bit rusty with KNX if you haven't used it for a while. This course is perfect to refresh you knowledge and also look into the possibilities of integrating with Alexa.

Price: £220 + VAT

KNX is Worldwide STANDARD for Home and Building Control

One day course at Home of Technologies Training Room.

What is included in the course?

- Presenting your KNX project to potential buyers or users
- Methods of engaging with your audience
- Put your learning to practice

Price: £60 + VAT

KNX is Worldwide STANDARD for Home and Building Control
Five day KNX Advanced Certification Course takes place at Home of Technologies Training Room.

What is included in the course?

- Fail-safe planning
- Flags
- HVAC control with KNX
- Integrated applications
- Interworking
- Couplers
- Lighting control
- Security technology
- Logic operations
- Visualisation Systems
- ETS Apps
- KNX and Multimedia
- KNX and Smart Metering/Smart Grid

The KNX Advanced Certification Course allows delegates to effectively deliver benefits of the KNX/EIB building controls, and provide value-added system design and installation service for their clients, after the KNX theory and practical training in ETS (the manufacturer independent programming tool). The KNX Advanced Certification Course ends with exam.

Do not hesitate to use this unique opportunity to become a true expert of KNX.

Price: £950 + VAT

Powerful software solutions for building automation.

Learn how about KNX integration, BACNet, ModBus, metering. We also offer to discuss your current project.

The course covers hands-on programming where you can program your own project with our KNX teacher while learning visualisation and BMS control.

Includes 90 days NETx BMS 2.0 License

Price: 550+VAT

Study about KNX integration, BACNet, ModBus, metering and other server related topics.

The course covers hands-on programming where you can program your own project with our KNX teacher while learning visualisation and BMS control.

Price: 550+VAT